Upgraded Smart Portable Air Inflator with Extra-Large Capacity 2500mAh Characteristic
- The tire pressure of your car is lost as time goes by Tire pressure varies with temperature Low pressure leads to increase of fuel consumption
- MIMODAY Rechargeable air compressor will solve the above perplexities of yours!
- Input voltage: Charger DC 12V/2500mA Home voltage: AC 110-240V Working voltage: DC 12V Battery capacity: 2500mAh Car Inflation efficiency: 195/65R (10 minutes) Inflation pressure: 150PSI（Max） Pressure units: PSI, BAR Working temperature: 0°C~50°C Size: 12.9*7.2*4.5cm （5*2.8*1.8inch） Weight: 500g Charging mode: USB Type-C
Wonderful Heat Dissipation
✔ There are two built-in fans, one fan is used for the heat dissipation of the cylinder, and there is a fan inside the motor for the heat dissipation of the motor. Provide good heat dissipation, so it can work continuously.
✔ Do not worry about the usage time, this pump can work without a break until it has no power.
✔ Attention: The air hose connection can be a bit hot, but will not burn, the max temperature is 50 degrees. Be careful that it is best not to touch it directly with your hand.
Inflatable Tube Storage & Power Switch
✔ The mini electric air pump is equipped with a storage hole for storing the inflation tube, the inflatable tube storage design prevents the inflatable tube from being lost and does not have to worry about the winding of the wire. It does not take up any space and can be used at any time, bringing you a more convenient experience.
✔ After the inflation tube is taken out, the tire inflator will automatically turn on. When the inflation tube is embedded in the inflator, the electric air pump will automatically turn off.
- Excellent Noise-reducing Function
- Due to the operating principle of the air pump, all pumps on the market are very noisy. Tested at a distance of one meter to the product, many products on the market have a resolution of 90dB and our air pump is optimized and upgraded for a noise reduction of 75dB. If you use it, you can still feel a bit loud, but it’s normal, feel free to use it.
How To Use:
1. Connect one end of the air tube to the inflator, connect the other end to the tire valve. (For the Presta valve, please install the valve converter at first)
2. Long press the Power Button to turn on the power, the air pump enters the measurement interface and displays real-time air pressure.
3. Pressing the Unit button can switch the units(PSI\BAR). (The recommended range of pressure can be found on the tire in general.)
4. The + Button and – Button are preset buttons for adjusting the target pressure. Long press them can adjust the target pressure quickly.
5. Pressing the Power Button can start inflating. Pressing it again can pause/continue. It will stop automatically when it reaches the target pressure.
6. Please quickly remove the air tube from the tire to prevent air leaks.
7. The inflator will not work when the target pressure you set is lower than the current tire pressure.
Attention: Do not switch on the car air pump when it is recharging.